#535 Now Sold

NB Dane Elm and Gun Metal Rollerball Pen 

(£5  from the sale of this pen will be gifted to The Narrowboat Heritage Foundation, the Custodians of NB Dane)



EUROPEAN ELM - Ulmus procera

European Elm has is a light to medium brown, sometimes with a hint of red. With an oil finish, it can turn a beautiful golden brown colour. Unless, of course, it's been kept at the bottom of a canal for an awfully long time.

The rotten parts of these rebuilt boats are usually used to stoke the fires that steam the new planks for bending to the hull's shape.Luckily these pieces of elm were too important to burn and have been properly stored. I wasn't sure how deep the rot would have gone and how deep I would have to delve into this piece to find stable wood. The pens I make from historic boat materials have been thoroughly tested by me to make sure that they will give pleasurable daily use.

Narrowboat Dane was built by the Mersey Weaver and Ship Canal Carrying Company and used as part of their fleet. She was built in November 1946 and first registered on January the first 1947. Ade from A P Boatbuilding is currently restoring her on behalf of The Narrowboat Heritage Foundation, the work being done is re-bottomed with new chine planks, kelson, stem post and soon to receive two new bow planks, gunwales, decks, new back cabin and engine room. The pens that I will be making from Dane are all from a heavy lump of Elm bottom plate.






After a post market treat of a curry out at Kudos Indian restaurant in Fazeley we once again pulled pins and headed for the first length of our journey to Mercia Marina in Willington to trade at Derbyshire's first ever floating market. 

We were looking forward to this one as it had the added benefit of all the marina facilities. We would be plugged into 240v electrics for the first time this year and Debbie had warned that the washing machine would be doing overtime!

First we had to get back to Fradley Junction and drop down through the busy locks and a run across glorious countryside to Alrewas and down onto the main Trent River for a short run past fast flowing weirs to stop at Burton-on-Trent for a good few days and make the last of the pens up that I was behind with and do lots of preparation for the next lot of turning using the electric hook-up at Mercia marina. 

The preparation that I needed to do involved - sawing some of the historic narrowboat wood into manageable sized pieces - turning these to rounds - marking/cutting/drilling/ them to accept the pen mechanisms and then stabilising some of the softer pieces with wood hardener. Once that was done it’d be time for gluing the brass tubes in place - cleaning the overspill from the insides and lastly barrel trimming the ends to get everything to fine machined angles.

In amongst all that I managed to get some pens finished, pen #535 was made at Burton-on-Trent on 19th May 2016



You can follow my pen making here on this blog and our travels on another blog here


oh and please like us on Facebook too here
https://www.facebook.com/ThePenMakersBoat



No comments:

Post a Comment

Thanks for commenting, you can always contact me via email at thepenmakersboat@gmail.com or find The Pen Makers Boat on Facebook. I'll get back to you as soon as I can.